Manual D810 Vise, 8" w/ 10" opening


The original Kurt Anglock D-Series vises are designed for precision part clamping on basic machine tools such as knee-type mills, grinders and machining centres. D-Series vises are ideal for use in running production parts where datums, flatness and parallelism is important. You can precision bore, tap, drill, grind and finish with high accuracy on most parts made of die cast aluminum, steel, and iron in your Kurt Anglock vises. No other brand can give you the time proven accuracy of the Kurt Anglock vises.

All Kurt vises have a friction reducing, needle bearing, thrust collar. The needle bearing increases jaw clamping pressure.


  • AngLock design assures the movable jaw does not lift.
  • Hardened vise bed.
  • Hardened jaw plates.
  • Semi-hard steel screw.
  • 80,000-PSI ductile iron body
  • Matching of bed height ±.001" available at an additional cost for the D40 and D100 vises.
  • Matching of the keyway to the stationary jaw ±.001" is available at additional cost.
  • Some models available in metric version.
  • 10 year limited warranty.

Kurt's new D810 features a new updated body style which incorporates several new features making the vise easier and faster to disassemble for cleaning. Top down, four bolt design on the stationary jaw reduces vise deflection by 25 percent while allowing total disassembly of the vise without removing the body from the machine table. Special brush seals shield and protect vise screw threads from machined chips and residue. The nut has been shortened so as not to protrude past the end of the vise body. New powder coat paint finish resists coolant-induced peeling for greater corrosion protection. The overall vise footprint is identical to earlier models so both can be used interchangeably and in tandem.

Kurt's new D810 vise is ideal for precision clamping very large parts for both tool and die and production CNC applications. With a jaw opening of 10 inches and clamping force up to 11,600 lbs., this vise locks parts precisely including very large parts for aggressive "hogging out" operations. Additional features of the Model D810 Kurt Vise include: original, world-famous Anglock design that insures the moveable jaw does not lift; 80,000-PSI ductile iron vise body provides rigidity and long term accuracy while absorbing machining vibration.

Top View
Side View
Front View
Torque Ft.-Lbs.D810
20 1834
40 3843
60 4349
80 5706
100 7042
120 8688
140 10413
160 11596

A 3.310
B 8.000
C 21.810
D 4.686
E 0.813
F 1.965
G 3.652
H 2.200
J 1.075
K 6.190
L 1.865
N 1.220
O 4.750
P 5/8-11
Q 11.500
R 11.000
S 4.940
T 8.500
U 0.880
V 2.375
W .875
AA 10
BB 14.730
BB MIN 4.730
CC 17.260
CC MIN 7.260
DD 21.990
DD MIN 11.990

CIS are distributors for
Kurt Workholding in the UK.

St Neots: 01480 225 850
High Wycombe: 01494 455 088
Portsmouth: 02392 202 300

Kurt Workholding Iron Clad Warranty

For more information about Kurt Workholding visit their global website.